- Standard
- 110
- Adjustable impact
- Yes
- Replaceable blade
- Yes
- Function
- IDC termination
Correct termination tools help make reliable connections in compatible IDC and network cabling hardware. Check the termination type, tool compatibility and manufacturer instructions before use.
Helpful answers from our Punchdown Tools knowledge base.
It seats an insulated conductor into an insulation-displacement contact so the contact cuts through the insulation and makes the electrical connection. On a cutting termination, it also trims the excess conductor at the same operation.
Use it on the IDC style it is designed for. The tool is there to make a controlled termination, not to provide a more elaborate way of pushing wire into any slot that happens to be nearby.
Put the cutting side towards the waste end of the conductor. The side you want to keep must remain on the terminal side of the cutter.
Check the orientation before you press. Cutting the cable on the wrong side is a very efficient way of turning a nearly finished termination into another attempt.
Because the IDC needs the conductor seated to the correct depth without damaging the contact. A proper punchdown tool supports the terminal and applies the force in the way the connector was designed for.
A screwdriver can spread the contact, damage the module or leave the conductor half seated. It can look finished and still give you an intermittent fault later.
Can't find the answer? Send us your question and we'll review it.