Network Accessories

Our Standard BT extension leads enable you to connect telephones, fax machines and computer modems to BT sockets at a greater distance away from the equipment than before.

Our Terminal Block 77A Couplers provide an effective means of eliminating connection problems that may be encountered during voice installations (for example cable cut too short). It is also used when it becomes necessary to extend a cable run to a new location.

This Miniline unit features 4x IEC male IEC sockets, and 1x female IEC supply socket. The brackets can be inverted to allow mounting on a flat surface.

This unit features a 2m mains lead with a male IEC C14 plug. This allows you to plug the PDU directly into a UPS.

This unit features 6x UK and 2x IEC C13 (Kettle) sockets, which further enhance your ability to connect mains powered equipment in your network rack.

Conforming to IEC 60320 our C14 (IEC) units have been designed specifically for 19” cabinet use. This unit is designed to be fitted to the front of a 19" network cabinet.

Conforming to IEC 60320 our C14 (IEC) units have been designed specifically for 19” cabinet use. This unit is designed to be fitted to the rear of a network cabinet.

Our Keystone Patch Panel frames permit Keystone-based, products such as our keystone Couplers to be mounted into a standard 19” rack. This product is particularly useful for when a rapid or temporary network installation is required.